Epoxy Cast Dry-Typetransformer Industrial 3 Phase Dry Type Power Electrical Transformer 100kVA to 400kVA CE ISO

Product Description

Epoxy Cast Dry-typeTransformer

Since the coil of SCB series epoxy resin dry-type transformer is encapsulated by epoxy resin, it is flame retardant, fireproof, explosion-proof, maintenance-free, pollution-free, small in size, and can be directly installed at the load center. At the same time, the core material is made of high-quality cold-rolled oriented silicon steel sheets, full-slant street seam stacked structure, scientific and reasonable design and casting process, so that the product has smaller partial discharge, lower noise, and stronger heat dissipation capacity. The product is also equipped with an intelligent temperature controller, which has fault alarm, over-temperature alarm, over-temperature tripping and black box functions, and is connected to the computer through the RS485 serial interface for centralized monitoring and control.

Product advantages:
1. The core is made of high-quality cold-rolled grain-oriented silicon steel sheets, and the core silicon steel sheets adopt 45-degree full-bevel joints to allow the magnetic flux to pass along the direction of the silicon steel sheet joints
2. Adopting domestic advanced technology, it has high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability and long service life;
3. Safe, fireproof, pollution-free, and can be directly operated at the load center;
4. Low loss, low noise, obvious energy-saving effect, maintenance-free;
5. Good heat dissipation performance, strong overload capacity, and can increase capacity operation when forced air cooling;
6. Good moisture-proof performance, suitable for operation in high humidity and other harsh environments;
7. Dry-type transformers can be equipped with a complete temperature detection and protection system. The intelligent signal temperature control system can automatically detect and display the operating temperature of each three-phase winding, automatically start and stop the fan, and have alarm, trip and other function settings;
8. Small size, light weight, small footprint, low installation cost
Product application:
Due to the advantages of strong short-circuit resistance, low maintenance workload, high operating efficiency, small size and low noise, dry-type transformers are often used in places with high requirements for fire protection and explosion protection. Such as hotels, restaurants, airports, high-rise buildings, commercial centers, residential areas and other important places, as well as subways, metallurgical plants, ships, offshore drilling and platforms and other places with harsh environments.

Serial number	Rated Capacity(KVA)	Phase	Primary Voltage (KV)	Secondary  Voltage (KV)	Connection symbol	Frequency	Short Circuit Impedance %	Cooling Type	Insulation grade
1	100	3	0.38 0.4  0.415	The rated voltage will be determine according to the actual Use from cuatermers ±3*50V  ±3*75V ±3*100V ±3*150V	Yd11 Dd0	The Frequencycan be adjusted according to user requirements   20Hz-120Hz	4	ONAN	A-level
2	125	3					4	ONAN	A-level
3	160	3					4	ONAN	A-level
4	200	3					4	ONAN	A-level
5	250	3					4	ONAN	A-level
6	315	3					4	ONAN	A-level
7	400	3					4	ONAN	A-level
8	500	3					4	ONAN	A-level
9	630	3					4.5	ONAN	A-level
10	800	3					4.5	ONAN	A-level
11	1000	3					4.5	ONAN	A-level
12	1250	3					4.5	ONAN	A-level

Packaging & Shipping

This series is widely used in power plants, substations, industrial and mining enterprises, ports, airports and other indoor or outdoor places.

FAQ

1.Are you manufacture or factory ? we are manufacture and we have more than 15 years'experience . 

2.what's your free warranty of machines? and how to make sure quality of machines ? our warranty of machine is 18 months and after we finish machines ,we will supply video of testing machines ,and welcome to visit our factory and inspect machines on site.

3.Engineer avilable oeverseas? our engineer can go aborad for installation of machines and train your workers ,and we have local engineers in kenya ,zimbabwe etc . 

4.if spares broken ,how to deal with it? we can send new spare by DHL courier ,you can receive them within 5 to 7 days.

5.what's your payment term ?
our payment term is 30% of deposit by T/T,another balance payment after we finish machine before shipment .

6.how to visit your factoty ?
you can fly to Beijing airport first ,and by airport bus or taxi to Beijing train station ,we will help you book train ticket from beijing to our city in advance ,then we pick you up from our train station.