| Customization: | Available |
|---|---|
| Application: | Wall Reinforcement |
| Color: | White Orange Blue Yellow |
|
Still deciding? Get samples of US$ 0.2/Square Meter
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Fiberglass alkali-resistant mesh is woven by fiberglass yarn as its basis mesh,and then coated by alkaline resistant latex. It has fine alkaline-resistant,high strength, etc. As an ideal engineering material in construction, it is mainly used to reinforce cement, stone, wall materials, roofing, and gypsum and so on.
We can produce any size mesh according to requirements of customer like different mesh size and weight per square meter.
We can supply special mesh as following:
(1) High strength mesh,
(2) Fire proof mesh.
(3) Strong and flexible mesh
We can supply specifications from 30g/m2 to 500g/m2 for mesh.
Main size: 5mm x 5mm or 4mm x 4mm, 75 g/m2, 90 g/m2, 125 g/m2,145 g/m2, 160 g/m2.
| Test Report | |||||
| No. | Test Item | Standard | Test Result | Conclusion | |
| 1 | Weight (g/m2) | ≥115 | 126 | OK | |
| 2 | Tensile Strength | Warp | ≥600 | 650 | OK |
| 3 | Weft | 710 | OK | ||
| 4 | Elongation | Warp | ≤5.0 | 4.5 | OK |
| Weft | 4.0 | OK | |||
Main process for fiberglass mesh production:
1.Materials:
Drawing fiberglass yarn by platinum crucible from glass marble.
2. Spining and beaming: twisted the fiberglass yarn into the desired ones for the mesh weaving.
3. Weaving: Set up a weaving loom,Feed the fiberglass yarn onto the loom or machine and weave the yarn into a mesh pattern according to the desired specifications. Make sure the tension is properly adjusted during this process.
4. Inspection: After weaving, inspect the mesh for any defects or imperfections. Remove any damaged or uneven portions as necessary.
5. Coating: Apply a resin coating to the fiberglass mesh for enhanced strength and durability.
6. Curing: Allow the resin-coated fiberglass mesh to cure in a designated curing area. This will typically involve controlled temperature and humidity levels to ensure proper hardening of the resin.
Hebei Shangze Rubber and Plastic Products Co., Ltd, Our company was founded in 2020-12-21. The company address is at No. 90, Sunwuying Village, Masen Township, High tech Zone, Hengshui City, Hebei Province. We are the manufacturer of construction engineering products which are used for highway,railway, bridge, tunnel.our products have been sold well in China , we are supplier of many state-owned enterprises.Our products are exported to many regions, such as Europe, the Middle East, Russia, South America and Southeast Asia. Welcome to consult!
Coperate company
Q2: How to deal with the faulty?
A: Firstly,our products are produced in strict quality control system and the defective rate will be less than 0.2%
Secondly,For defective batch products,we will repair them and resend them to you or we can discuss the solution according to real situation.
Q3: What is your MOQ?
A: Most products we have stocks,so any quantity can acceptable,for customized ordered should be 500pcs for each item.
Q4: The price of your products is higher than others.
A: We can't promise you the best price, but we can promise you the best quality. Our products are made of good material and produced in strict quality control system,it is also has strictly testing and quality checking procedure before packing and shipping.
Q5: How can i get assurance from you?
A: You can trade with us through MIC assurance order, it will keep safty for your order.
Q6: Can i visit the factory firstly before place order?
A: We are warmly welcome all the customer friends visit us and learn us.
Q7: Leading time
A: Stocks, goods will be ready in 7 days after receive deposite,customized goods will be ready in 15 days after receive deposite.
Exactly leading time pls confirm with sales before ordered
Q8: Payment terms
A: Payment by TT 30% deposit ,70% balance against BL copy
L/C,Payple,western union,moneygram and others also can accept against different situation.
){kind=link}