Building Material Steel Chemical Plastic Rubber Steel-Edged Reinforced Waterstop 350mm*8mm

• After-sales Service: Online Technical Guidance
• Warranty: 1-3 Years
• Type: Building Sealing Material
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Ceiling Tile Shape: Strip
• Material: Rubber
• Thickness: 6mm 8mm 10mm
• Surface Treatment: Vulcanized
• Function: Waterproof
• Certification: GB
• Color: Black or Customized
• Usage: Outdoor
• Tensile Strength: 10MPa or Above
• Elongation at Break: 380%
• OEM: Available
• Test Report: Available
• Transport Package: in Bags or as Required
• Specification: As Customized
• Trademark: SZ
• Origin: Hebei China
• HS Code: 4016931000
• Production Capacity: 50, 000 Meters/ Month

Product Description

Product Description

Rubber Waterstop is widely used in construction concrete joints. It is to reach waterproof standards of construction joints, by increasing combination areas of two concrete construction/ placement.

Technical Index

Rubber Waterstop:                              GB/T18173.2-2014
No.	Item			Index
				B.S.	J
					JS	JX
1	Hardness (Shore A)/ degree			60±5	60±5	40-70
2	Tensile strength/ MPa >=			10	16	16
3	Elongation at break/ % >=			380	400	400
4	Compression set/ %	70ºC×24h, 25% <=		35	30	30
		23ºC×168h, 25% <=		20	20	15
5	Tear strength/ (KN/m) >=			30	30	20
6	Brittleness temperature/ ºC <=			-45	-40	-50
7	Hot air aging 70ºC×168h	Hardnesschange (ShoreA)/ degree <=		+8	+6	+10
		Tensile strength/ MPa >=		9	13	13
		Elongation at break/ % >=		300	320	300
8	Adhesion strength between rubber and cord fabric/ (N/mm) >=			-	5	-
Rubber to metal adhesive items are only applicable to waterstops compounded with steel edges.
Demension: Length: Usually 20m or 25m per roll. Width: 150mm, 200mm, 250mm, 300mm, 350mm, 400mm, 450mm, 500mm etc. Thickness: 3mm-20mm. Costomized demensions are available.

Features

1. Abrasion resistance, good water resistance.
2. High tensile strength, high tear resistance.
3. High break elongation rate, less compression set.
4. Low fragility temp, anti-aging, anti-corrosion.
5. Easy installation, customized to design and construction.

Rubber Waterstop Classification

Based on using position, rubber waterstop can be classified into buried waterstop and back stick waterstop. According to its appearance, buried waterstop can be classified into CB type and CP type. CB type with holes in the middle, while CP type with no holes in the middle. Back stick waterstop also can be classified into two types: EB type and EP type. EB type refers to the waterstop with holes in the middle, while EP type refers to the waterstop with no holes in the middle. Adding steel plate on each side of the rubber waterstop, then steel edged rubber waterstop is produced.

Company advantage
• 10 years of production experience
• 2,000 square meters technology R&D Center
• Complete quality control system
• Full range of waterproof materials
• 10 exporting countries
• Accept trial order
• Provide OEM service
Please choose us as your best partner